Yderbeklædning:Yderbeklædning er væ

Yderbeklædning:
Yderbeklædning er væggen som ses udefra, som skal give det udtryk som køberne ønsker udseendemæssigt. Beklædningen skal kunne modstå alle slags vejr, som at skærme for vind og nedbør, samt modstå minusgrader.

Ventileret hulrum:
Ventileret hulrummet bruges til at lede fugten væk fra den bærende konstruktion, så den ikke ødelægger eller beskadiger det. Ved at skabe hulrummet bruges afstandslister, som skal sættes på yderbeklædningen.

Vindtæt lag:
Det vindtætte lag bruges til at sikrer at konstruktionen med isolering ikke bliver blæst omkuld, hvis der ikke var et vind lag ville isoleringsevnen bliver forringet. Det vindtætte lag bruges også til at sikre, at fugten fra hulrummet kan løbe ud af konstruktionen. Det gøres ved at monterer en fugtspærre på det vindtætte lag, som dermed leder fugten ud ved yderbeklædningen. Fugtspærren monteres enten inde bag det vindtætte lag eller ud mod det ventilerede hulrum.

Bærende konstruktion:
Lige bagved det vindtætte lag kommer den bærende konstruktion. Den er placeret på et betonfundament, hvor den sættes fast med en slags gevindstang, som kan modstå vind, så konstruktion ikke bliver belastet. Omkring dette lag er der også en stor del isolering. Konstruktionen består af træ profiler som er placeret på lodret, mellem profilerne fyldes der isoleringsmateriale. Under de lodrette profiler er der en fodrem, som bruges til at holde de lodrette profiler lige.

Dampspærre:
Uden på den bærende konstruktion er der en dampspærre, som skal gør at fugten inde fra bygning ikke kan trænge ind i konstruktionen. Dampspærren må maks sættes ⅓ inde i isoleringslaget. Dampspærren sættes ofte fast lige efter den bærende konstruktion.

Resultater (Engelsk) 1:

Outerwear:Outerwear is the wall as seen from the outside, which should give the expression as buyers want my looks. Sheathing must be able to withstand all kinds of weather, such as wind and precipitation, as well as displays withstand sub-zero temperatures.Ventilated cavity:Ventilated cavity is used to manage the moisture away from the supporting structure so that it does not destroy or damage it. By creating the cavity used lathing, which must be set on the outer sheathing.Windproof layer:The wind-proof layer is used to ensure that the construction with insulation will not be blown away, if there was not a breeze layer would the insulation will be degraded. The wind-proof layers are also used to ensure that the moisture from the cavity to drain out of the design. It is done by mounting a moisture barrier on the wind-proof layer, which thus head the moisture out through the outer sheathing. Moisture lock-off shall be fitted either inside behind the wind-proof layers or out against the ventilated cavity. Supporting structure:Just behind the wind-tight layer comes to the supporting structure. It is placed on a concrete foundation, where it attaches with a sort of threaded rod, which can withstand wind, so construction will not be loaded. On this layer, there is also a large part insulation. The construction consists of wood profiles, which is located on the vertical, between the profiles filled that insulation material. Under the vertical profiles, there is a fodrem that is used to keep the vertical profiles. Vapor barrier:Without the supporting structure there is a vapor barrier, which must do to moisture from inside the building can not penetrate into the design. Vapor lock-off must be Max ⅓ inside the insulation layer. Vapor lock-off be often established just after the load-bearing construction.

Resultater (Engelsk) 2:

Outerwear:
Outerwear is the wall as seen from the outside, which will give it expression as buyers want in appearance. The liner must withstand all kinds of weather, which block the wind and rain and withstand freezing temperatures.

Ventilated cavity:
Ventilated cavity used to lead moisture away from the supporting structure so that it does not destroy or damage it. By creating cavity used spacer bars to be put to the skin.

Windproof layer:
This windproof layer is used to ensure that the construction with insulation does not get blown away if there was a wind layer would insulation ability becomes impaired. The wind-resistant layer is also used to ensure that the moisture from the cavity to drain out of the structure. This is done by installing a vapor barrier at the windproof layer, which consequently lead moisture out of the outer cladding. The vapor barrier installed either behind the windproof layer or against the ventilated cavity.

Supporting structure:
Just behind the windproof layer comes the supporting structure. It is placed on a concrete foundation in which it can be secured with a type of threaded rod, which can withstand wind, so that construction is not overloaded. Around this layer is also much insulation. The construction consists of wooden profiles which are located on the vertical, between the profiles is filled insulating material. During the vertical profiles is a sill which is used to hold the right vertical profiles.

Insulating Materials:
The outside of the supporting structure is a vapor barrier, which should make the moisture from inside the building can not enter into the structure. The vapor barrier must not exceed set ⅓ inside the insulation layer. The vapor barrier are often fixed right after the supporting structure.

Resultater (Engelsk) 3:

outerwear:outerwear is the wall as seen from the outside, to give it expression as buyers want udseendemæssigt. the coating must be able to withstand all kinds of weather, like screens for wind and rain, and resist below zero.ventilated cavity:ventilated cavity be used to direct moisture away from the supporting structure, so that it does not destroy or damage it. by creating the cavity used afstandslister which must be put on the shell plating.windproof layer:the vindtætte layer is used to ensure that the design of the insulation is not blown, if there was a wind layer would isoleringsevnen will deteriorate. the vindtætte layer is also used to ensure that the moisture from the cavity can run out of the design. this is done by installing a fugtspærre at the vindtætte layer, thereby leading the moisture out of the shell plating. fugtspærren installed either inside the vindtætte layers or against the ventilated cavity.supporting construction:right behind the vindtætte layer comes the supporting construction. it is located on a betonfundament where it is fixed with a kind of gevindstang which can resist wind, so that construction will not be loaded. around this layer there is also a big part of insulation. the design consists of wood profiles which are placed vertically between the profiles filled with insulation material. under the vertical profiles, there is a fodrem, used to keep the vertical profiles.vapour barrier:without the supporting structure there is a vapour barrier, which makes the moisture from inside the building can not penetrate into the design. dampspærren tops must be ⅓ inside isoleringslaget. dampspærren is often stuck right after the supporting structure.